电信科学 ›› 2014, Vol. 30 ›› Issue (3): 1-4.doi: 10.3969/j.issn.1000-0801.2014.03.001

• 视点聚焦 •    下一篇

物联网发展的标准问题

卢捍华1,邵媛媛2,孙洪波2,丁斌3   

  1. 1 南京邮电大学云计算研究中心 南京 210003
    2 南京邮电大学通信与信息工程学院 南京 210003
    3 福富信息技术股份有限公司 福州 350013
  • 出版日期:2014-03-20 发布日期:2017-06-16
  • 基金资助:
    国家科技重大专项“泛在网络下多终端协同的网络控制平台及关键技术”基金资助项目;福富信息技术股份有限公司研究基金资助项目

Study on Standardization Aspects of IoT

Hanhua Lu1,Yuanyuan Shao2,Hongbo Sun2,Bin Ding3   

  1. 1 Cloud Computing Research Center, Nanjing University of Posts and Telecommunications, Nanjing 210003, China
    2 College of Telecommunication＆Information Engineering, Nanjing University of Posts and Telecommunications, Nanjing 210003, China
    3 Fujian-Fujitsu Communication Software Co., Ltd., Fuzhou 350013, China
  • Online:2014-03-20 Published:2017-06-16

在线阅读

2

PDF下载

497

被引次数

10

摘要：

针对物联网发展中的标准问题进行了讨论。在确认国内物联网定义之后，讨论了标准在物联网发展中的地位，指出当前对待物联网标准的一些误区，并讨论了物联网应当能够广泛融合各种技术和标准，而融合的最好方法是基于系统的抽象。最后，作为对本文描述内容的举例说明，简述了南京邮电大学物联网科技园传感控制平台采取的措施。

关键词: 物联网, 标准化, 框架方法, 传感网, 系统抽象

Abstract:

Standardization aspects of IoT were discussed. After identified the definition of IoT in China, challenges of IoT were put forward. Somebody considered those challenges mainly came from the lack of standards, according to the definition of IoT, different technologies and standards must be included in IoT. It was pointed out that instead of standardization, abstract methods should be the most effective way to make the inclusion. As an example, the sensor and actuator platform built by NUPT was briefly introduced.

Key words: internet of things, standardization, framework and method, sensor network, system abstract

No Suggested Reading articles found!