电信科学 ›› 2017, Vol. 33 ›› Issue (3): 100-106.doi: 10.11959/j.issn.1000-0801.2017075

• 运营技术广角 • 上一篇    下一篇

基于传送API的POTN设备建模方法研究和实践

荆瑞泉,胡骞,赵国永   

  1. 中国电信股份有限公司北京研究院,北京102209
  • 修回日期:2017-03-09 出版日期:2017-03-01 发布日期:2017-04-05
  • 作者简介:荆瑞泉(1972-),男,中国电信股份有限公司北京研究院教授级高级工程师,传送网专业专家,主要研究方向为传送 SDN、OTN、网络运营系统等。|胡骞(1988-),男,博士,中国电信股份有限公司北京研究院工程师,主要研究方向为传送SDN和网络运营系统。|赵国永(1978-),男,中国电信股份有限公司北京研究院系统架构师,主要研究方向为传送SDN、软件系统架构等。
  • 基金资助:
    超高速宽带通信北京市重点实验室资助项目(BZ0268)

Research and practice of POTN equipment modeling method based on transporrt API

Ruiquan JING,Qian HU,Guoyong ZHAO   

  1. Beijing Research Institute of China Telecom Co., Ltd., Beijing 102209, China
  • Revised:2017-03-09 Online:2017-03-01 Published:2017-04-05
  • Supported by:
    Beijing Key Laboratory on Ultra High-Speed Broadband Communication(BZ0268)

摘要:

如何利用层次化的SDN控制架构实现对分组增强型OTN(POTN)设备的有效控制是当前传送SDN 领域研究的一个重点,其涉及对POTN设备建立合理的信息模型。首先对基于传送API的POTN设备建模方法的现状进行了分析,然后提出了一种针对集中交换型POTN设备的建模方法,并在2016年OIF/ONF联合组织的全球传送SDN(TAPI)互联互通演示中,对所提出的建模方法进行了测试验证。

关键词: 传送SDN, 传送API, 信息模型, 分组增强型OTN

Abstract:

How to control packet enhanced OTN (POTN)equipment by using hierarchical SDN controllers is the research focus of the transport SDN, which involves reasonable modeling of POTN equipments. Firstly, the status of POTN equipment modeling method based on transport API was analyzed. Then a modeling method for centralized switching POTN equipment was proposed. During OIF/ONF 2016 global transport SDN prototype demonstration, the proposed modeling method was verified by testing.

Key words: transport SDN, transport API, information model, POTN

中图分类号: 

No Suggested Reading articles found!