电信科学 ›› 2023, Vol. 39 ›› Issue (10): 41-48.doi: 10.11959/j.issn.1000-0801.2023192

• 研究与开发 • 上一篇    

基于自适应哈希函数的电力线载波通信网络终端功率控制方法

薛红, 王佳晗, 孙玉玲, 韩博, 肖羽白   

  1. 国网辽宁省电力有限公司,辽宁 沈阳 110168
  • 修回日期:2023-10-13 出版日期:2023-10-01 发布日期:2023-10-01
  • 作者简介:薛红(1977- ),女,国网辽宁省电力有限公司高级工程师,主要从事电能计量、需求侧管理、电力信息化等工作
    王佳晗(1990- ),女,国网辽宁省电力有限公司工程师,主要研究方向为计量器具检定检测、需求侧管理和电力信息化
    孙玉玲(1971- ),女,国网辽宁省电力有限公司工程师,主要从事电能计量和电力信息化工作
    韩博(1996- ),男,国网辽宁省电力有限公司助理工程师,主要研究方向为电能计量器具检定检测和电力信息化
    肖羽白(1992- ),女,国网辽宁省电力有限公司工程师,主要研究方向为计量器具检定检测、资产配送管理和电力信息化

Terminal power control method of power line carrier communication network based on adaptive hash function

Hong XUE, Jiahan WANG, Yuling SUN, Bo HAN, Yubai XIAO   

  1. State Grid Liaoning Electric Power Co., Ltd., Shenyang 110168, China
  • Revised:2023-10-13 Online:2023-10-01 Published:2023-10-01

摘要:

在对网络终端功率进行控制时,由于网络状态动态波动,通信网络终端功率的适应性调节能力较差,为此,提出了基于自适应哈希函数的电力线载波通信网络终端功率控制方法。考虑电力线载波通信网络的实际运行状态是动态波动的,为哈希函数设置了自适应机制,构建了自适应哈希函数,利用自适应函数对原始的电力线载波通信网络运行状态数据进行计算后,在可变的多混沌映射系统次迭代得到最终的哈希值。在电力线载波通信网络终端功率控制阶段,计算了处于蜂窝模式时和处于设备到设备(device-to-device,D2D)通信模式时,通信网络终端受到其他通信网络终端的干扰,并将其作为自适应哈希函数的输入值,将最终的哈希值一致作为参数调整基准,实现了对各通信网络终端功率的控制。在测试结果中,所提控制方法不仅有效降低了恒定通信条件下的网络终端功率上升幅度,同时有效降低了动态通信条件下的网络终端功率输出,具有较高的适应性调节能力。

关键词: 自适应哈希函数, 电力线载波通信网络, 终端功率, 自适应机制, 多混沌映射, 蜂窝模式, D2D模式

Abstract:

In the control of network terminal power, due to the overall low analysis of network state, the adaptive regulation ability of communication network terminal power is poor.Therefore, the power line carrier communication network terminal power control method based on adaptive hash function was proposed.Considering the dynamic fluctuation of the actual operating state of the power line carrier communication network, the adaptive mechanism was set for the hash function, and the adaptive hash function was constructed for the original running state data, and the final hash value was obtained in the variable chaotic mapping system.In the power control stage of the power line carrier communication network terminal, the communication network terminal was affected by the interference of other communication network terminals, and it was used as the input value of the adaptive hash function to realize the power control of each communication network terminal.In the test results, the proposed control method not only effectively reduces the increase range of network terminal power under constant communication conditions, but also effectively reduces the network terminal power output under dynamic communication conditions, which has a high adaptive adjustment ability.

Key words: adaptive hash function, power line carrier communication network, terminal power, adaptive mechanism, multi-chaos mapping, cellular mode, D2D mode

中图分类号: 

No Suggested Reading articles found!