通信学报 ›› 2012, Vol. 33 ›› Issue (11): 84-90.doi: 10.3969/j.issn.1000-436x.2012.11.011

• 学术论文 • 上一篇    下一篇

网络管控系统的柔性可重构结构设计

李玉峰,邱菡,刘勤让,兰巨龙   

  1. 国家数字交换系统工程技术研究中心,河南 郑州 450002
  • 出版日期:2012-11-25 发布日期:2017-07-25
  • 基金资助:
    国家高技术研究发展计划(“863”计划)基金资助项目;国家重点基础研究发展技术(“973”计划)基金资助项目

Design of network management and regulation system over flexible reconfiguration

Yu-feng LI,Han QIU,Qin-rang LIU,Ju-long LAN   

  1. National Digital Switching System Engineering and Tech logical Research Center,Zhengzhou 450002,China
  • Online:2012-11-25 Published:2017-07-25
  • Supported by:
    The National High Technology Research and Development Program of China (863 Program);The National Basic Research Program of China(973 Program)

摘要:

网络管控系统是面向互联网“可管、可控、可信”需求提出的新设备形态。骨干链路级管控设备的体系结构目前基本沿袭核心路由器的设计思路,存在数据平面、控制平面分离无法满足管控系统软硬件协同深层次数据处理需求,刚性封闭系统构建方式无法满足新业务识别柔性需求的问题。由此提出网络管控系统的软硬件交换式松耦合协同处理结构和软硬件循环迭代迁移结构和方法,可实现软硬件融和式协同数据处理,满足了新业务识别的柔性迁移需求。

关键词: 网络管控系统, 体系结构, 可重构, 循环迭代, 迁移

Abstract:

Network management and regulation system is a new arising appliance for the manageable,controllable and trustworthy demand of the Internet.The architecture design of the backbone link-level management and regulation system usually follows the core router,in which the separation of the data plane and the control plane could not meet the requirement of HW/SW data co-process,the rigid connection with closed building style could not satisfy the flexible identification of new applications.The loosely coupled switching HW/SW co-process architecture and the iterative looping HW/SW migration architecture were proposed,which could satisfy the above HW/SW co-process demand and the new application flexible identification demand.

Key words: network management and regulation system, architecture design, flexible reconfiguration, iterative loop, migration

No Suggested Reading articles found!