Journal on Communications ›› 2017, Vol. 38 ›› Issue (3): 92-100.doi: 10.11959/j.issn.1000-436x.2017063

• Papers • Previous Articles     Next Articles

Blind separation algorithm of PCMA signals with different symbol rates based on DG-PSP

Yi-ming GUO1,Hua PENG1,Yong YANG1,Xue-juan WEI1,Hao WANG2   

  1. 1 School of Information Systems Engineering,PLA Information Engineering University,Zhengzhou 450002,China
    2 61081 Troop of PLA,Beijing 100094,China
  • Revised:2016-12-16 Online:2017-03-01 Published:2017-04-13
  • Supported by:
    The National Natural Science Foundation of China(61401511)

Abstract:

A blind separation algorithm was proposed for PCMA signals with different symbol rates based on double grid per-survivor processing (DG-PSP).The channel states and two input signal components were treated as two dynamic grids,receiving mixed-signal reconstructed by respectively iterative updating the two groups of grid status,thus achieving blind signal separation.The joint iterative decoding separation structure was focused,and a detailed analysis and comparison under different error estimation of parameters was shown.The complexity of the algorithm is similar to the traditional PSP algorithm.Simulation results show that,a gain of about 2 dB in signal-noise ratio can be obtained after the first iteration at a bit error rate of 10?2,and a gain of nearly 3 dB in signal-noise ratio can be obtained after the second iteration.

Key words: PCMA, different symbol rates, double grid, blind separation

CLC Number: 

No Suggested Reading articles found!