Telecommunications Science ›› 2016, Vol. 32 ›› Issue (7): 11-20.doi: 10.11959/j.issn.1000-0801.2016175175

• Viewpoint aggregation • Previous Articles     Next Articles

A function composition method of software defined networking based on topology transformation

Xiaoqiang XI,Julong LAN,Tong DUAN,Yiming JIANG   

  1. National Digital Switching System Engineering & Technology Research Center,Zhengzhou 450002,China
  • Online:2016-07-20 Published:2017-04-26
  • Supported by:
    The National Basic Research Program of China(973 Program);The National Basic Research Program of China(973 Program);The National Natural Science Foundation of China;The National Natural Science Foundation of China;The National Natural Science Foundation of China;The National High Technology Research and Development Program of China(863 Program);The National High Technology Research and Development Program of China(863 Program)

Abstract:

The existing function composition methods of software defined networking (SDN) are mostly carried out in the single node without considering the function bearing capacity of the single switch.To solve this problem,firstly a function composition method based on topology transformation was proposed to carry out function composition in multiple nodes by transforming abstract topology.Secondly,the topology transformation was modeled as the 0-1 linear programming problem and a comprehensive search algorithm was proposed to solve this problem.Finally,the function composition module and implemented the prototype system based on NetFPGA-10G and Ryu controller were devised to do the function composition.The experimental results show that the method can reduce processing delay and storage cost as well as improve the composition efficiency compared with the existing method.

Key words: software defined networking, topology transformation, function composition, NetFPGA-10G

No Suggested Reading articles found!