面向智能制造的多模态网络应用技术研究

doi:10.11959/j.issn.1000-0801.2023131

Abstract

Abstract:

The rise of intelligent manufacturing has induced many new demands on network technology.The polymorphic network separates the network technology from the support environment, supporting the coexistence as well as flexible loading and operation of various network technologies in the same network support environment, and can provide diversified, customizable, and highly reliable network service capabilities.The network environment requirements of intelligent manufacturing were studied, and smart factories were taken as an example to design efficient technical solutions based on the polymorphic network for various application scenarios.Different network technologies were efficiently adapted to application scenarios such as collaborative research and development design, production line control, machine vision quality inspection, unmanned intelligent inspection, accident emergency response, etc.The study verified the technical advantages of applying polymorphic networks to intelligent manufacturing, which could provide strong support for promoting the transformation and upgrading of the manufacturing industry.

Key words: intelligent manufacturing, polymorphic network, application technology

CLC Number:

TP393

Tao ZOU, Huifeng ZHANG, Wanxin GAO, Qi XU, Congqi SHEN, Jun ZHU, Zhongxia PAN, Xingchang GUO. Research on polymorphic network application technology oriented intelligent manufacturing[J]. Telecommunications Science, 2023, 39(6): 61-72.

Figures/Tables 11

References 14

[1]	邬江兴 . 论网络技术体制发展范式的变革——网络之网络[J]. 电信科学, 2022,38(6): 3-12.
	WU J X . Revolution of the development paradigm of network technology system—network of networks[J]. Telecommunications Science, 2022,38(6): 3-12.
[2]	邬江兴 . 新型网络技术发展思考[J]. 中国科学(信息科学), 2018,48(8): 1102-1111.
	WU J X . Thoughts on the development of novel network technology[J]. Scientia Sinica (Informationis), 2018,48(8): 1102-1111.
[3]	胡宇翔, 伊鹏, 孙鹏浩 ,等. 全维可定义的多模态智慧网络体系研究[J]. 通信学报, 2019,40(8): 1-12.
	HU Y X , YI P , SUN P H ,et al. Research on the full-dimensional defined polymorphic smart network[J]. Journal on Communications, 2019,40(8): 1-12.
[4]	李洁, 张东, 常洁 ,等. 面向智能制造的工业连接现状及关键技术分析[J]. 电信科学, 2017,33(11): 146-153.
	LI J , ZHANG D , CHANG J ,et al. Situation description and critical technology analysis for industrial connection of intelligent manufacturing[J]. Telecommunications Science, 2017,33(11): 146-153.
[5]	GUSEV P , BURKE J . NDN-RTC:real-time videoconferencing over named data networking[C]// Proceedings of the 2nd ACM Conference on Information-Centric Networking. New York:ACM Press, 2015: 117-126.
[6]	AFANASYEV A , BURKE J , REFAEI T ,et al. A brief introduction to named data networking[C]// Proceedings of MILCOM 2018 - 2018 IEEE Military Communications Conference (MILCOM). Piscataway:IEEE Press, 2019: 1-6.
[7]	VENKATARAMANI A , KUROSE J F , RAYCHAUDHURI D ,et al. MobilityFirst[J]. ACM SIGCOMM Computer Communication Review, 2014,44(3): 74-80.
[8]	MARIYASAGAYAM M N , MENOUAR H , LENARDI M . GeoNet:a project enabling active safety and IPv6 vehicular applications[C]// Proceedings of 2008 IEEE International Conference on Vehicular Electronics and Safety. Piscataway:IEEE Press, 2008: 312-316.
[9]	LEE J H , ERNST T . Overhead analysis on secure beaconing for GeoNetworking[C]// Proceedings of 2011 IEEE Intelligent Vehicles Symposium (IV). Piscataway:IEEE Press, 2011: 1049-1053.
[10]	TOUKABRI T , TSUKADA M , ERNST T ,et al. Experimental evaluation of an open source implementation of IPv6 GeoNetworking in VANETs[C]// Proceedings of 2011 11th International Conference on ITS Telecommunications. Piscataway:IEEE Press, 2011: 237-245.
[11]	KUHLMORGEN S , LLATSER I , FESTAG A ,et al. Performance evaluation of ETSI GeoNetworking for vehicular ad hoc networks[C]// Proceedings of 2015 IEEE 81st Vehicular Technology Conference (VTC Spring). Piscataway:IEEE Press, 2015: 1-6.
[12]	TAO Y , LI X , TSUKADA M ,et al. DUPE:duplicated unicast packet encapsulation in position-based routing VANET[C]// Proceedings of 2016 9th IFIP Wireless and Mobile Networking Conference (WMNC). Piscataway:IEEE Press, 2016: 123-130.
[13]	BARIK R K , PRIYADARSHINI R , LENKA R K ,et al. Fog computing architecture for scalable processing of geospatial big data[J]. International Journal of Applied Geospatial Research, 2020,11(1): 1-20.
[14]	ETSI,TCITS. Intelligent transport systems (ITS); Vehicular communications; geonetworking; Part 4:geographical addressing and forwarding for point-to-point and point-to- multipoint communications; Sub-part 2:media-dependent functionalities for ITS-G5:ETSI TS 102[S]. 2013.

Metrics

Recommended 0

No Suggested Reading articles found!

Research on polymorphic network application technology oriented intelligent manufacturing

RichHTML

PDF下载

Knowledge

Abstract

Cite this article

share this article

Figures/Tables 11

References 14

Related Articles 13

Metrics

Recommended 0

[1]	Yu LI, Zhaozhao LI, Ping LYU, Qinrang LIU. Design on the full-dimensional reconfiguration polymorphic network switching chip architecture [J]. Telecommunications Science, 2023, 39(6): 22-32.
[2]	Jiong LI, Yuxiang HU, Pengshuai CUI, Le TIAN, Yongji DONG. Research on incremental deployment mechanism of network modality for polymorphic network environment [J]. Telecommunications Science, 2023, 39(6): 33-43.
[3]	Aihua LIU, Hanguang LUO, Jianzhong WEN, Zhiguo ZHAN. Research on isolated-forwarding technology oriented polymorphic network [J]. Telecommunications Science, 2023, 39(6): 52-60.
[4]	Jie ZHANG, Yongjian ZHAO, Dongrui XIAO, Yong XU, Jianhong XU, Jianjian YANG. Research on intent-based cooperative architecture of polymorphic network and service [J]. Telecommunications Science, 2023, 39(6): 73-84.
[5]	Hong SHEN, Ling CUI, Tiankui ZHANG. Research on 5G network deployment scheme for intelligent manufacturing [J]. Telecommunications Science, 2022, 38(Z1): 158-163.
[6]	Yaoqi LIU, Hongguang LI, Yiqing ZHOU, Jinglin SHI, Yingjiao MA, Manli QIAN. Industrial 5G based digital twin control platform for flexible intelligent manufacturing [J]. Telecommunications Science, 2022, 38(Z1): 174-183.
[7]	Jiangxing WU. Revolution of the development paradigm of network technology system—network of networks [J]. Telecommunications Science, 2022, 38(6): 3-12.
[8]	Bin LIU,Yunyong ZHANG. Application of digital twin model based industrial internet [J]. Telecommunications Science, 2019, 35(5): 120-128.
[9]	Lingyi KONG. Deployment and application of “5G+MEC”enabled intelligent manufacturing [J]. Telecommunications Science, 2019, 35(10): 137-145.
[10]	Chunting WANG,Lijun ZHAI,Ning LI,Ningning LU. General idea of application system for space-ground integrated information network [J]. Telecommunications Science, 2017, 33(12): 36-42.
[11]	Jie LI,Dong ZHANG,Jie CHANG,Zhen YANG. Situation description and critical technology analysis for industrial connection of intelligent manufacturing [J]. Telecommunications Science, 2017, 33(11): 146-153.
[12]	Mingfeng HUANG. Thinking about two fusion work in the new situation [J]. Telecommunications Science, 2016, 32(1): 105-107.
[13]	Siwei YANG. Impact of the upgraded version of German“industrial 4 platform”on China's manufacturing industry [J]. Telecommunications Science, 2016, 32(1): 108-111.