Telecommunications Science ›› 2016, Vol. 32 ›› Issue (2): 75-82.doi: 10.3969/j.issn.1000-0801.2016.02.011

• research and development • Previous Articles     Next Articles

Comparisons and validations on MIMO channel simulation models

Xiongwen ZHAO1,2,Bo GAO1   

  1. 1 School of Electrical and Electronic Engineering,North China Electric Power University,Beijing 102206,China
    2 National Mobile Communications Research Laboratory,Southeast University,Nanjing 210096,China
  • Published:2017-02-03
  • Supported by:
    The National Natural Science Foundation of China;Open Research Fund of National Mobile Communications Research Laboratory,Southeast University

Abstract:

WINNER and COST2100 channel models are geometry based statistical models,they are the most important channel models for MIMO(multi-input multi-output)system simulations in the fourth generation(4G)radio systems. Due to different physical mechanism advantages for WINNER and COST2100 models,there is almost no work available for the comparative studies between the two channel models and effectiveness and agreement in a specific scenario. The channel simulation and measurement studies for the two channel models in indoor environment was focused on. In the line-of-sight(LOS)and non-line-of-sight(NLOS)cases,the power-delay-profile (PDP),Ricean factor,channel capacity,rms delay and rms angular spread were simulated using the two channel models and measurement data. The comparative studies between the simulation and measurement results are performed to test the effectiveness and agreement of the two models in a practical application environment.

Key words: WINNER channel model, COST2100 channel model, power delay profile, Ricean factor, channel capacity, delay spread, angle spread

No Suggested Reading articles found!